.

If there is an IDE ATA/ATAPI controllers device manager category, and there is an AMD SATA controller listed there, then your notebook does not support RAID.

F11 tries to boot from the NIC which is plugged in but just comes. The ACU has different operating modes, allowing faster configuration or greater control over configuration options.

To get to the RAID setup options, when the screen appears showing the F9 and F11 options press F8 every second or so, and you’ll first get the ILO configuration.

.

The utility has the following options: Network Options. We would need to know the server model, controller type, cache configuration and operating system to be able to give specific details/actions. Option 2 sounded much better.

.

. hp. Select Clear Configuration and Create Array.

. HP Driver Pre-configuration.

Moreover, this is the only page where "RAID" keyword can be found in this document.

Moreover, this is the only page where "RAID" keyword can be found in this document.

I found this tip mentioned in this post on the HP forums here. .

Array Configuration Utility. .

The current array configuration displays: Click Delete to delete the existing virtual disk.
.
.

com/V2/GetPDF.

It is not possible to rebuild RAID 0 (striped) configurations.

Hewlett Packard Enterprise Support Center. Please go through this and see if that helps :. .

If I select F9 its the BIOS which doesnt have anything RAID related. . 82. . Windows. The BIOS opens.

.

. Under System Options, select Configure Storage Controller for RAID and POST Prompt for RAID Configuration.

Enables the Ctrl +I Prompt, which allows the user to enter the RAID Configuration Utility.

.

.

We would need to know the server model, controller type, cache configuration and operating system to be able to give specific details/actions.

.